Gear Aid Aquaseal FD Repair Kit .25oz

Aquaseal FD Repair Kit is a compact solution for quick and permanent repairs of outdoor gear such as waders, drysuits, and inflatables. It includes the basic tools for a repair, and it's ideal for all types of fabrics.

Ideal For:

• Repairing tears in waders, paddling jackets, dry tops, and dry suits
• Fixing waterproof gear made of neoprene, rubber, nylon, vinyl, or canvas
• Making durable, in-the-field repairs

Adhesive Material: Thermoset urethane

Adhesive Size: 0.75 oz

Color: Clear

Adheres To: Neoprene, rubber, nylon, GORE-TEX fabric, canvas, vinyl/PVC

Cure Time: 8-12 hours (2 hours with cure accelerator)

Application Temperature: 60° to 100°F (above 40% relative humidity)

Use Temperature: -20° to 180°F

Tape Material: PVC and nylon

Tape Size and Colors: Two 3" clear and black

Need to make a quick repair? Use the Aquaseal FD Repair Kit to permanently fix torn waders, seal a drysuit leak, or patch an inflatable. A trusted patch kit that packs away in a lightweight container, it's compact and ideal for fixing all types of neoprene, vinyl, nylon, and GORE-TEX® fabric items. The kit includes the necessary tools to make a permanent repair at home or a quick repair in the field, including: Aquaseal FD adhesive (0.25 oz), two large Tenacious Tape hex patches, a brush and instructions.

California WARNING: Using this product will expose you to toluene, a chemical known to the State of California to cause birth defects or other reproductive harm www.P65Warnings.ca.gov .

• Durable & Flexible: Tough repair adhesive bonds permanently to surfaces, dries clear, and cures to a flexible rubber that bends with neoprene and other fabrics.
• Waterproof: Provides a water-tight seal that won't peel or crack over time.
• Abrasion Resistant: Keeps gear looking good by withstanding scrapes and scratches.
• All-Purpose: Adhesive bonds permanently to neoprene, rubber, nylon, vinyl, canvas, and waterproof-breathable fabrics.

Step 01

Clean the damaged area. Remove dirt and debris from your gear, and make sure the surface is completely dry. A clean surface ensures the adhesive sticks properly.

Step 02

Apply Aquaseal FD. Use the brush to apply a thin, even layer of adhesive over the tear, extending slightly beyond the edges. Let the adhesive become tacky - this takes about 30 minutes.

Step 03

Reinforce with Tenacious Tape. Place a patch of Tenacious Tape over the repair while the adhesive is still tacky. Smooth it down to remove any air bubbles.

Step 04

Let it cure. Allow your gear to sit undisturbed for 8-12 hours ( if possible ). Once cured, the repair is flexible, strong, and waterproof.

Click for Instructions